“Pro controllers that never drift, for a seamless gaming experience.”

How to Fix Pro Controller Drift Issues

Pro controllers are a popular choice among gamers for their advanced features and ergonomic design. However, one common issue that many users face is controller drift. Controller drift occurs when the joystick on the controller moves on its own, even when the user is not touching it. This can be frustrating and can affect gameplay, making it difficult to control characters or navigate menus.

Model	EC-8851/EC-9900 High Precision Conductivity/resistivity controller
Range	0-200/2000/4000/10000uS/cm
	0-20/200mS/cm 0-18.25MΩ
Accuracy	Conductivity:1.5%;  Resistivity:2.0%(FS)
Temp. Comp.	Automatic temperature compensation based on 25℃
Oper. Temp.	Normal 0～50℃; High temp 0～120℃
Sensor	0.01/0.02/0.1/1.0/10.0cm-1
Display	LCD Screen
Current Output	4-20mA output/2-10V/1-5V
Output	High/Low limit dual relay control
Power	DC24V/0.5A or
	AC85-265V±10% 50/60Hz
Working Environment	Ambient temperature:0～50℃
	Relative humidity≤85%
Dimensions	96×96×72mm(H×W×L)
Hole Size	92×92mm(H×W)
Installation Mode	Embedded

There are several reasons why pro controllers may experience drift. One common cause is wear and tear on the joystick mechanism. Over time, the internal components of the joystick can become worn down, leading to erratic movements. Another possible cause is dust and debris that can accumulate inside the controller, interfering with the joystick’s sensors.

If you are experiencing controller drift with your pro controller, there are a few steps you can take to try and fix the issue. One option is to recalibrate the controller. This can help reset the joystick’s center point and may resolve any drift issues. To recalibrate your controller, go to the settings menu on your gaming console and look for the controller calibration option. Follow the on-screen instructions to recalibrate the controller.

CCT-3300
Constant	10.00cm-1	1.000cm-1	0.100cm-1	0.010cm-1
Conductivity	(500～20,000)	(1.0～2,000)	(0.5～200)	(0.05～18.25)
	μS/cm	μS/cm	μS/cm	MΩ·cm
TDS	(250～10,000)	(0.5～1,000)	(0.25～100)	——
	ppm	ppm	ppm
Medium Temp.	(0～50)℃（Temp. Compensation : NTC10K）
Resolution	Conductivity: 0.01μS/cm；0.01mS/cm
	TDS: 0.01ppm
	Temp.: 0.1℃
Accuracy	Conductivity:1.5%（FS）
	Resistivity: 2.0%（FS）
	TDS:1.5%（FS）
	Temp:±0.5℃
Analog Output	Single isolated(4～20)mA，instrument/transmitter for selection
Control Output	SPDT relay，Load Capacity: AC 230V/50A(Max)
Working Environment	Temp: (0～50)℃；Relative humidity： ≤85%RH(none condensation)
Storage Environment	Temp:(-20～60)℃; Relative humidity ≤85%RH(none condensation)
Power Supply	DC 24V/AC 110V/AC 220V±15%（for selection）
Dimension	48mm×96mm×80mm (H×W×D)
Hole Size	44mm×92mm (H×W)
Installation	Panel mounted, fast installation

If recalibrating the controller does not fix the drift issue, you may need to clean the joystick. To do this, you will need a small screwdriver to open up the controller. Once the controller is open, use a can of compressed air to blow out any dust or debris that may be causing the drift. Be careful not to damage any of the internal components while cleaning the joystick.

If cleaning the joystick does not resolve the drift issue, you may need to replace the joystick mechanism. You can purchase replacement joystick mechanisms online or from a gaming store. To replace the joystick, carefully remove the old mechanism and install the new one according to the manufacturer’s instructions. This should fix any drift issues caused by a worn-out joystick mechanism.

In some cases, controller drift may be caused by a software issue rather than a hardware problem. If you have tried recalibrating, cleaning, and replacing the joystick mechanism and are still experiencing drift, you may need to update the controller’s firmware. Check the manufacturer’s website for any available firmware updates and follow the instructions to install them on your controller.

If none of these solutions fix the drift issue with your pro controller, it may be time to consider contacting the manufacturer for support. They may be able to provide additional troubleshooting steps or offer a repair or replacement for your controller.

In conclusion, pro controllers can experience drift issues due to wear and tear, dust, or software problems. By recalibrating, cleaning, and replacing the joystick mechanism, you may be able to fix the drift problem on your own. If these steps do not work, consider updating the controller’s firmware or contacting the manufacturer for further assistance. With some patience and troubleshooting, you can get your pro controller back to working properly and enjoy uninterrupted gaming sessions.