1) Downflow type.
2) Working Position : Service->Back Wash->Brine and slow rinse->Fast Rinse->Refill->Service .
3) Using ceramic moving valve disk, small rotation torque.
4) Abrasion resistance of the sealing surface, outstanding and long-lived deal.
5) It could be operated with pressure directly
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
For use with single or multiple tank systems
Backwashes softener tanks up to 36″ diameter
Continuous flow rate of 106 GPM
Widely used for electric power,electronics,metallurgy,petrochemical,pharmaceutical ,food and beverage,environmental protection field .
Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
Regenerates immediately when needed for continuous soft water
Corrosion-free fiber-reinforced polymer valve body
Widely used in water purifiers, business water machines, pure water machine
Easy to use with reduced installation time
Can be used on a variety of pipes including copper pipe
No tools required
Fittings are cost-effective reusable components for maximum flexibility
For warm and cold water
Corrosion-free with no scale build-up
This series of brine valves have overcome the deficiency of the products existing in the market. It can not only protect water injection and check the air, but also can limit the extreme amount of water injection and filter the water running inside. If water injection is too fast, the liquid level inside the brine well will spill out quickly and the injection has to be shut down, which will result in the insufficiency of water inside the brine tank and have bad influence upon the outcome of recycling. This kind of brine valves depends on water pressure to work. It is reliable in working and valuable in extensive employment.
