Understanding the Hardness Setting on Your Fleck 5600sxt

The Fleck 5600sxt is a highly efficient water softener system that is renowned for its advanced features and user-friendly interface. One of the key features that sets this system apart is its customizable hardness setting. Understanding this setting is crucial for optimizing the performance of your Fleck 5600sxt and ensuring the longevity of your household appliances.

The hardness setting on the Fleck 5600sxt refers to the level of mineral concentration in your water supply. Hard water is characterized by high levels of minerals such as calcium and magnesium. These minerals can cause a variety of problems, including scale buildup in pipes and appliances, reduced effectiveness of soaps and detergents, and potential health issues. By adjusting the hardness setting on your Fleck 5600sxt, you can effectively manage these issues and enjoy the benefits of soft water.

Category	Model	Inlet/Outlet	Drain	Base	Riser Pipe	Water Capacity m3/h
automatic filter valve	AF2	3/4″, 1″	3/4″	2.5″	1.05″ OD	2
	AF2-H	3/4″, 1″	1/2″	2.5″	1.05″ OD	2
	AF4	1″	1″	2.5″	1.05″ OD	4
	AF10	2″	1″	4″	1.5″D-GB	10

To determine the appropriate hardness setting for your Fleck 5600sxt, you first need to know the hardness level of your water supply. This can be done by using a water hardness test kit, which is readily available in most home improvement stores. Once you have determined the hardness level of your water, you can then adjust the hardness setting on your Fleck 5600sxt accordingly.

The Fleck 5600sxt features a digital display that allows you to easily adjust the hardness setting. The system uses a unit of measurement known as grains per gallon (gpg) to quantify water hardness. For instance, if your water hardness test indicates a hardness level of 10 gpg, you would set the hardness setting on your Fleck 5600sxt to 10.

It’s important to note that the hardness setting on your Fleck 5600sxt should be adjusted periodically. This is because the hardness level of your water supply can fluctuate over time due to various factors such as changes in the water source or seasonal variations. Regularly testing your water and adjusting the hardness setting on your Fleck 5600sxt will ensure that your system is always operating at peak efficiency.

In addition to the hardness setting, the Fleck 5600sxt also features a regeneration setting. This setting determines how often the system regenerates, or recharges, its resin beads. The resin beads are what actually soften the water by removing the hard minerals. The frequency of regeneration depends on the hardness level of your water and the amount of water you use.

For example, if you have a high hardness level and use a lot of water, you may need to set the regeneration frequency to every two days. On the other hand, if you have a low hardness level and use less water, you may only need to set the regeneration frequency to once a week.

In conclusion, understanding the hardness setting on your Fleck 5600sxt is key to maximizing the performance of your water softener system. By regularly testing your water and adjusting the hardness and regeneration settings accordingly, you can ensure that your system is always providing you with soft, clean water. Furthermore, by effectively managing the hardness of your water, you can prolong the lifespan of your household appliances and potentially save money on soap and detergent costs.

How to Adjust the Hardness Setting on a Fleck 5600sxt for Optimal Performance

The Fleck 5600sxt is a highly efficient water softener system that is renowned for its reliability and durability. It is designed to eliminate the hardness of water, which is primarily caused by the presence of minerals such as calcium and magnesium. The hardness of water can lead to several problems, including the buildup of scale in pipes and appliances, reduced effectiveness of soaps and detergents, and potential skin and hair dryness. Therefore, it is crucial to adjust the hardness setting on your Fleck 5600sxt to ensure optimal performance.

The Fleck 5600sxt comes with a digital control head that allows you to adjust the hardness setting according to your specific needs. The control head features a user-friendly interface with an LCD display that shows the current settings and status of the system. The hardness setting is typically measured in grains per gallon (gpg), and the default setting is usually set at 20 gpg. However, this may not be the ideal setting for your water supply, as the hardness level can vary significantly depending on your geographical location and the source of your water.

To adjust the hardness setting on your Fleck 5600sxt, you will first need to determine the hardness level of your water supply. This can be done by using a water hardness test kit, which can be purchased from a home improvement store or online. The test kit will provide a measurement in gpg, which you can then use to adjust the hardness setting on your Fleck 5600sxt.

Once you have determined the hardness level of your water supply, you can proceed to adjust the hardness setting on your Fleck 5600sxt. To do this, press the “set” button on the control head to enter the programming mode. Then, use the up and down arrows to adjust the hardness setting to match the hardness level of your water supply. After you have made the adjustment, press the “set” button again to save the new setting.

It is important to note that adjusting the hardness setting on your Fleck 5600sxt is not a one-time task. The hardness level of your water supply can change over time due to various factors, such as changes in the water source or seasonal variations. Therefore, it is recommended to test the hardness level of your water supply periodically and adjust the hardness setting on your Fleck 5600sxt accordingly.

Model: Automatic Softener Valve	ASE2 -LCD/LED
Refilling type	refill before regeneration	refill after regeneration
Working Position	Service->Refill the softener water->Service->Back Wash->Upflow Brine and slow rinse->Fast rinse->Service	Service->Back Wash->Upflow Brine and slow rinse-> Fast rinse-> Refill the softener  water->Service
	Automatic type	Automatic type
	Meter Delay	Meter Delay
Regeneration mode	Intelligent Meter Delay	Meter immediate
	Timer by day :  0-99 days	Intelligent Meter Delay
	Timer by hours: 0-99 hours	Intelligent Meter Immediate
		Timer by day :  0-99 days
		Timer by hours: 0-99 hours
Inlet	1/2”  3/4”  1”
Outlet	1/2”  3/4”  1”
Drain	1/2”
Base	2-1/2”
Riser pipe	1.05” OD
Water Capacity	2m3/h
Working Pressure	0.15-0.6Mpa
Working Temperature	5-50°C
Power Supply	AC100-240 / 50-60Hz     /       DC12V-1.5A

In conclusion, adjusting the hardness setting on your Fleck 5600sxt is a crucial step in ensuring optimal performance of the system. By doing so, you can effectively eliminate the hardness of your water supply, thereby preventing scale buildup in your pipes and appliances, enhancing the effectiveness of your soaps and detergents, and improving the health of your skin and hair. With its user-friendly interface and adjustable hardness setting, the Fleck 5600sxt offers a practical and efficient solution for managing the hardness of your water supply.