Table of Contents
Benefits of Using Hunter Flow Sensor in Irrigation Systems
Irrigation systems play a crucial role in maintaining healthy and vibrant landscapes, whether it be for residential lawns, commercial properties, or agricultural fields. One key component of an efficient irrigation system is a flow sensor, which helps monitor and regulate the flow of water to ensure optimal water usage and prevent wastage. Hunter Industries, a leading manufacturer of irrigation products, offers a range of high-quality flow sensors that are designed to enhance the performance and efficiency of irrigation systems.
| Measuring Method | N,N-Diethyl-1,4-phenylenediamine (DPD) spectrophotometry | |||
| Model | CLA-7122 | CLA-7222 | CLA-7123 | CLA-7223 |
| Inlet water channel | Single channel | Dual channel | Single channel | Dual channel |
| Measurement range | Total Chlorine : (0.0 ～ 2.0)mg/L ,calculated as Cl2 ; | Total Chlorine : (0.5 ～10.0)mg/L ,calculated as Cl2 ; | ||
| pH：（0-14）；temperature：（0-100）℃ | ||||
| Accuracy | Free chlorine: ±10% or 0.05mg/L (whichever is greater), calculated as Cl2; Total chlorine: ±10% or 0.05mg/L (whichever is greater), calculated as Cl2 | Free chlorine: ±10% or 0.25mg/L (whichever is greater), calculated as Cl2; Total chlorine: ±10% or 0.25mg/L (whichever is greater), calculated as Cl2 | ||
| pH:±0.1pH；Temp.:±0.5℃ | ||||
| Measurement cycle | Free Chlorine≤2.5min | |||
| Sampling interval | The interval (1～999) min can be set to any value | |||
| Maintenance cycle | Recommended once a month (see maintenance chapter) | |||
| Environmental | Ventilated and dry room without strong vibration; Suggested room temperature: (15 ～ 28)℃; relative humidity: ≤85% (no condensation). | |||
| requirements | ||||
| Sample water flow | （200-400） mL/min | |||
| inlet water pressure | （0.1-0.3） bar | |||
| Inlet water temperature range | （0-40）℃ | |||
| Power supply | AC (100-240)V； 50/60Hz | |||
| Consumption | 120W | |||
| Power connection | 3-core power cord with plug is connected to the mains socket with ground wire | |||
| Data output | RS232/RS485/（4～20）mA | |||
| Dimension size | H*W*D:（800*400*200）mm | |||
One of the primary benefits of using a Hunter flow sensor is its ability to accurately measure the flow rate of water through the irrigation system. By monitoring the flow rate, the sensor can detect any irregularities or fluctuations in water usage, which can indicate potential leaks or other issues that may need to be addressed. This real-time data allows users to quickly identify and resolve any problems, helping to prevent water waste and minimize water damage to the landscape.
| Model | RM-220s/ER-510 resistivity controller |
| Range | 0-20uS/cm; 0-18.25MΩ |
| Accuracy | 2.0%(FS) |
| Temp. Comp. | Automatic temperature compensation based on 25℃ |
| Oper. Temp. | Normal 0～50℃; High temp 0～120℃ |
| Sensor | 0.01/0.02 cm-1 |
| Display | LCD Screen |
| Communication | ER-510:4-20mA output/RS485 |
| Output | ER-510:High/Low limit dual relay control |
| Power | AC 220V±10% 50/60Hz or AC 110V±10% 50/60Hz or DC24V/0.5A |
| Working Environment | Ambient temperature:0～50℃ |
| Relative humidity≤85% | |
| Dimensions | 48×96×100mm(H×W×L) |
| Hole Size | 45×92mm(H×W) |
| Installation Mode | Embedded |
In addition to monitoring water flow, Hunter flow sensors also provide valuable information on water usage patterns and trends. By analyzing this data, users can gain insights into how water is being distributed throughout the landscape, allowing them to make informed decisions on when and where to adjust irrigation schedules. This data-driven approach helps optimize water usage, reduce water consumption, and promote healthier plant growth.
Another key benefit of using a Hunter flow sensor is its compatibility with advanced irrigation controllers and smart technology. By integrating the flow sensor with a smart controller, users can automate the irrigation process based on real-time flow data and weather conditions. This level of automation not only saves time and effort but also ensures that the landscape receives the right amount of water at the right time, leading to improved efficiency and water conservation.
Furthermore, Hunter flow sensors are designed for easy installation and maintenance, making them a convenient and cost-effective solution for irrigation systems of all sizes. The sensors are durable, weather-resistant, and built to withstand harsh environmental conditions, ensuring reliable performance year after year. With minimal upkeep required, users can enjoy peace of mind knowing that their irrigation system is operating at peak efficiency with minimal downtime.
Overall, the benefits of using a Hunter flow sensor in irrigation systems are clear: improved water management, reduced water waste, enhanced plant health, and increased efficiency. By investing in a high-quality flow sensor from Hunter Industries, users can take their irrigation system to the next level and enjoy a lush, healthy landscape while conserving water resources. Whether for residential, commercial, or agricultural applications, a Hunter flow sensor is a smart choice for anyone looking to optimize their irrigation system and make a positive impact on the environment.
How to Properly Install and Maintain Hunter Flow Sensor in Your Landscape
Hunter Industries is a well-known name in the world of irrigation systems, and their flow sensors are a crucial component for ensuring efficient water usage in your landscape. Proper installation and maintenance of these sensors are essential to maximize their effectiveness and prolong their lifespan.
When it comes to installing a Hunter flow sensor, there are a few key steps to keep in mind. First and foremost, it is important to choose the right location for the sensor. Ideally, the sensor should be installed downstream from the main shut-off valve and before any zone valves. This will allow the sensor to accurately measure the flow of water through the system.
Once you have selected the location for the sensor, the next step is to connect it to the irrigation system. This can typically be done by cutting into the mainline and inserting the sensor in-line with the pipe. Be sure to follow the manufacturer’s instructions for proper installation, as this will ensure that the sensor functions correctly.
After the sensor has been installed, it is important to calibrate it to ensure accurate readings. This can usually be done through the irrigation controller, where you can input the sensor’s specifications and adjust the settings as needed. Regular calibration is essential to maintain the accuracy of the sensor and prevent any issues with over or under-watering.
In addition to proper installation, regular maintenance of the Hunter flow sensor is also crucial. This includes checking the sensor for any signs of damage or wear, as well as cleaning it regularly to prevent clogs or blockages. It is also important to check the sensor’s connections and wiring to ensure that everything is secure and functioning properly.
Another important aspect of maintaining a Hunter flow sensor is to regularly check for leaks or other issues with the irrigation system. Any leaks or malfunctions can affect the sensor’s readings and lead to inefficient water usage. By staying on top of any maintenance issues and addressing them promptly, you can ensure that your flow sensor continues to function properly and help you save water and money in the long run.
In conclusion, proper installation and maintenance of a Hunter flow sensor are essential for ensuring efficient water usage in your landscape. By following the manufacturer’s instructions for installation, calibrating the sensor regularly, and staying on top of maintenance tasks, you can maximize the effectiveness of the sensor and prolong its lifespan. With a well-maintained flow sensor, you can enjoy a healthy and beautiful landscape while conserving water and saving money on your water bill.
