No products were found matching your selection.
Other Related Products
-
Meter and time dual mode, the meter mode, its inflow meter achieved all station can be set according to the water volume demanded , as long as set by the swap of tank volume (L) backwash water and wash water, set cycle running water volume(ton), according to the set value for each station after descending to the switch when the “0”, discontinued or no water stop decreasing and maintain. This series of products have beautiful appearance, high material precision of valve body parts, good strength and high temperature resistance, and the main valve body is connected with metal inserts with good maintainability.
-
Typical applications ā¢ Widely used in thermal boiler deaerator water and large and medium-sized industrial boiler feed water; ā¢ Operational supervision of reactor Primary circuit, secondary circuit circuits and condensate systemļ¼ ā¢ On-line analysis of dissolved oxygen in circulating water of heat exchange system; ā¢ Deaeration control of marine fresh water system, thermal system and…
-
Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
Regenerates immediately when needed for continuous soft water
Corrosion-free fiber-reinforced polymer valve body
-
CM-230s conductivity meter is an upgrade of the old CM-230, is an economic intelligent industrial online conductivity meter
1. full range (0~20/200/2000) automatic switching, intelligent digital temperature compensation;
2. display unit can be changed: uS/cm or ppm
3. conductivity & temperature can be displayed on the same screen
-
High Cost-Effective ,widely used for chemical industry,paper making industry,industrial coating,pharmaceutical,food,beverage,municipal water,Environmental and so on.
-
Single stage RO controller used for conductivity monitoring and process program control .
-
Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
For use with single or multiple tank systems
Backwashes softener tanks up to 36″ diameter
Continuous flow rate of 106 GPM
-
Measure range :TUR-6101 (0~5NTU) ;TUR-6102 (0~100NTU)
-
Fully adjustable, 5-cycle control delivers upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service
Time-tested, hydraulically-balanced piston, seal and spacer, controls service flow and regeneration
Non-corrosive, fiber-reinforced polymer construction
Excellent flow rates (19 GPM continuous, 24 GPM peak)
Backwash capacity handles tanks up to 16″ diameter for softener, andĀ filter
