How to Revive a Dried Out ph meter
A ph meter is an essential tool for anyone working in a laboratory setting or conducting experiments that require precise pH measurements. However, if a ph meter is not properly maintained, it can dry out and become unusable. In this article, we will discuss how to revive a dried out ph meter and ensure that it continues to provide accurate readings.
When a ph meter dries out, the electrode can become damaged and the internal components may no longer function properly. This can result in inaccurate pH readings and potentially ruin any experiments or tests that rely on precise pH measurements. To prevent this from happening, it is important to properly store and maintain your ph meter when not in use.
If you find that your ph meter has dried out, there are a few steps you can take to try and revive it. The first thing you should do is carefully inspect the electrode to see if there are any visible signs of damage. If the electrode appears to be intact, you can try rehydrating it by soaking it in a solution of distilled water and pH buffer solution.
To do this, fill a small container with enough distilled water to fully submerge the electrode. Add a few drops of pH buffer solution to the water to help restore the electrode’s sensitivity. Gently place the electrode in the solution and allow it to soak for at least 24 hours. This will help rehydrate the electrode and hopefully restore its functionality.
After soaking the electrode, carefully rinse it with distilled water to remove any excess buffer solution. Be sure to handle the electrode with care to avoid causing any further damage. Once the electrode has been rinsed, you can try calibrating the ph meter to see if it is now able to provide accurate readings.
To calibrate the ph meter, you will need to use pH buffer solutions of known pH values. Follow the manufacturer’s instructions for calibrating your specific ph meter model, as the process may vary depending on the brand and type of meter you are using. Once the ph meter has been calibrated, test it with a sample of known pH to ensure that it is providing accurate readings.
| Model | pH/ORP-8851/9900 pH/orp meter |
| Range | 0-14 pH; -2000 – +2000mV |
| Accuracy | ±0.1pH; ±2mV |
| Temp. Comp. | Automatic temperature compensation |
| Oper. Temp. | Normal 0～60℃; High temp 0～100℃ |
| Sensor | pH double/triple sensor; ORP sensor |
| Display | Big Screen LCD Screen |
| Communication | 4-20mA output/RS485 |
| Output | High/Low limit dual relay control |
| Power | DC24V/0.5A or AC85-265V±10% 50/60Hz |
| Working Environment | Ambient temperature:0～50℃ |
| Relative humidity≤85% | |
| Dimensions | 96×96×72mm(H×W×L) |
| Hole Size | 92×92mm(H×W) |
| Installation Mode | Embedded |
In conclusion, it is important to properly store and maintain your ph meter to prevent it from drying out and becoming unusable. If you find that your ph meter has dried out, try rehydrating the electrode with a solution of distilled water and pH buffer solution. Calibrate the ph meter and test it with a known pH sample to ensure that it is providing accurate readings. If the ph meter is still not functioning properly, consider replacing the electrode or seeking professional assistance. By taking these steps, you can revive a dried out ph meter and continue to rely on it for accurate pH measurements in your laboratory work.
| ROC-2315 ro controller instruction (220V) | |||
| Model | ROC-2315 | ||
| Single detection | Dry Contact input | Raw water no water protection | |
| (six channels) | Low-pressure protection | ||
| High-pressure protection | |||
| Pure water tank high level | |||
| External control mode signal | |||
| Running reset | |||
| Control port | Dry Contact output | Raw water pump | SPST-NO low capacity : AC220V/3A Max ;AC110V/5A Max |
| (five channels) | Inlet valve | ||
| High pressure pump | |||
| Flush valve | |||
| Conductivity over-limit drainge valve | |||
| Measurement detection point | Product water conductivity and with Automatic Temperature compensation (0～50）℃ | ||
| Measurement range | Conductivity : 0.1~200μS/cm/1~2000μS/cm/10~999μS/cm (with different conductivity sensor ) | ||
| Product water temp. : 0~50℃ | |||
| Accuracy | 1.5 level | ||
| Power supply | AC220V (±10%) , 50/60Hz | ||
| Working environment | Temperature:（0～50）℃ ; | ||
| Relative Humidity :≤85%RH (no condensation ) | |||
| Dimension | 96×96×130mm( height ×width×depth) | ||
| Hole size | 91×91mm（height ×width） | ||
| Installation | Panel mounted ,fast installtion | ||
| Certification | CE | ||
