DR Large Series Floated Bed Soften Valve
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
The appearance and all geometric parameters and parts of the DR20/40/50/20T/40T series floating bed softening valves are the same as those of the corresponding GR20/40/50/20T/40T valves. The floating bed has good water quality, is suitable for high raw water hardness, and is equipped with an exchange tank that is thin and tall. The operating flow rate is between 30-60 meters per hour, but the resin loading rate must be above 90%. It requires stable working pressure, and is not suitable for frequently starting or water usage that varies frequently.
DR Large Series Floated Bed Soften Valve Features:
1. Full flow control, especially the salt absorption flow control in the regeneration process, saving salt and water, saving energy and reducing consumption.
2. Keyboard lock function to prevent misoperation.
3. Power failure parameter protection, power failure memory and water failure memory.
4. The end face ceramic seal with high flatness and corrosion resistance is adopted, which has good sealing effect and long service life.
5. The number of repeated flushing can be set.
6. Optimized design of valve body and flow channel, with greater water production.
7. Multiple interlocking and multi-mode output control can be used to control the feed water pump, the water inlet solenoid valve, and realize the parallel interlocking of double valves, one for use and one for backup.
8. The 485 interface can be extended to realize remote control.