How to Remove a push fit Valve: A Step-by-Step Guide
When it comes to plumbing, push fit valves are a popular choice due to their ease of installation and reliability. However, there may come a time when you need to remove a push fit valve, whether it’s for maintenance, repair, or replacement. In this step-by-step guide, we will walk you through the process of removing a push fit valve.
| Model | Tube(a) | Stem(b) |
|---|---|---|
| 1801-A | 1/4 | 1/4 |
| 1801-C | 1/4 | 3/12 |
First and foremost, it’s important to gather the necessary tools and materials for the task at hand. You will need a pipe cutter or a hacksaw, a deburring tool, and possibly a pair of adjustable pliers. Additionally, it’s a good idea to have a bucket or a towel on hand to catch any water that may spill during the removal process.
The first step in removing a push fit valve is to turn off the water supply to the valve. This can typically be done by locating the shut-off valve for the specific area of the plumbing system where the valve is located. Once the water supply is turned off, you will need to drain any remaining water from the pipes by opening a faucet at a lower point in the system.
Next, you will need to prepare the pipe for removal of the push fit valve. If the pipe is copper, use a pipe cutter to carefully cut the pipe just below the push fit valve. If the pipe is plastic, a hacksaw may be used instead. After cutting the pipe, use a deburring tool to remove any rough edges or burrs from the cut end of the pipe to ensure a smooth surface for the new fitting.
With the pipe prepared, it’s time to remove the push fit valve. Depending on the type of push fit valve, there may be a release collar that needs to be depressed in order to release the grip on the pipe. Use a pair of adjustable pliers to depress the release collar and gently pull the push fit valve away from the pipe. Be sure to have a bucket or towel ready to catch any water that may spill during this process.
Once the push fit valve has been removed, inspect the end of the pipe to ensure that it is clean and free of any debris. If necessary, use a deburring tool to clean up the end of the pipe before installing a new fitting.
In conclusion, removing a push fit valve is a straightforward process that can be completed with the right tools and a systematic approach. By following the steps outlined in this guide, you can safely and effectively remove a push fit valve from your plumbing system. Remember to take your time
