No products were found matching your selection.

Other Related Products

  • JY GR Large Series Fixed Bed Softening Valve

    GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.

  • FET-8920 Insert Electromagnetic Flow Meter

    Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.

  • DO-1800 Dissolved Oxygen Meter

    Online dissolved oxygen detector is an online intelligent dissolved oxygen detector produced by our company with the introduction of foreign technology, using imported components and dissolved oxygen film head, based on the latest polarographic analysis technology, and advanced production technology and surface attachment technology. The use of this series of advanced analytical techniques to ensure long-term stability, reliability and accuracy of the instrument. With Chinese menu operation, 485 communication and other functions. It can be widely used in chemical fertilizer, metallurgy, environmental protection water treatment engineering, pharmaceutical, biochemical, food, aquaculture and tap water and other solutions for continuous monitoring of dissolved oxygen value.

  • ROC MFC-1202/ MFC-1382 General/Multi-parameter Online Controller

    Multiplex display, display window with free configuration of 2/4 parameters;
    Support bus data acquisition of 1-4 channels with arbitrary attributes;
    Support 1 way two-wire system 4-20mA variable input;
    Support WiFi and LORA and other wireless data acquisition;
    The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
    Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
    With CE certification

  • FLECK Control Valve 9100

    Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
    Regenerates immediately when needed for continuous soft water
    Corrosion-free fiber-reinforced polymer valve body

  • ROS-2210 Reverse Osmosis Program Controller

    Single stage RO controller used for conductivity monitoring and process program control .

  • ROC pH/ORP 6900 wall mounted pH/ORP online transmitter

    1. On-line analysis and process control of the oil refining, metallurgy, chemical synthesis industry process;
    2. Water quality on-line analysis for the power industry, electronic industry, pharmaceutical industry, clinical equipment, food industry, beverage industry etc;
    3. Online analysis and drug maintenance of the process for environmental monitoring, waste water treatment, water purification ;
    4. Industry of the people’s livelihood, such as municipal water treatment, circulating cooling water, swimming pool management, scientific and technological agriculture;
    5. The biological fermentation, industrial coating, chemical process experimental study.
  • Multi Parameter Online Water Quality Residual Chlorine AnalyzerMulti Parameter Online Water Quality Residual Chlorine Analyzer

    POP-8300 Free Chlorine online controller

    • On-line analysis of municipal water tank disinfection
    • Chlorine supplement control of pipe secondary pressurization (no negative pressure)
  • JY GR-2 Economical Up Flow Regenerate Softening Valve

    Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.