Fluorescence quenching principle, no need for internal filling, no oxygen consumption, and easy maintenance;
The service life of the fluorescent membrane cap is more than one year (under ideal conditions);
Original altitude, atmospheric oxygen partial pressure, temperature compensation, to improve the authenticity of the data;
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
Time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
Solid, lead-free brass valve body for superior strength and durability
Backwash capacity handles tanks up to 30″ diameter
1-1/2″ top mount control valve ideal for smaller size commercial/industrial applications
Consistent brining regardless of salt levels with timed brine refills
Choice of 7 or 12 day clock, manual or meter
Continuous flow rate of 51 GPM with a backwash of 49 GPM
Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.
This series instruments are widely used for online pH/ORP monitoring in environment protection water treatment, pure water treatment, industrial process and so on.
Single stage RO controller used for conductivity monitoring and process program control .
“One Dynamic and Two Static” Double Static Ceramics Plates Multi-port Valve is on behalf of another beginning in the field of water treatment control, which can overcome many disadvantages of traditional products in installation.
FLECK control valve 5600 softening water equipment generally uses fixed bed downstream
regeneration, the working process is operation, backwashing, regeneration, replacement,
positive washing, salt tank water injection.
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;
