In-line Stem is widely used in water purifiers, business water machines, pure water machine
Easy to use with reduced installation time
Can be used on a variety of pipes including copper pipe
No tools required
Fittings are cost-effective reusable components for maximum flexibility
For warm and cold water
Corrosion-free with no scale build-up
FLECK control valve 5600 softening water equipment generally uses fixed bed downstream
regeneration, the working process is operation, backwashing, regeneration, replacement,
positive washing, salt tank water injection.
Widely used for electric power,electronics,metallurgy,petrochemical,pharmaceutical ,food and beverage,environmental protection field.
Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
ZR type double tank floating bed control valve including ZR4-1/ZR4-1S(Side Loading), ZR10-1/ZR10-1S(Side Loading). It is equiped the inlet flow Meter and drainage flow meter, All the parameters is set by water volume, The double swap tank is for Alternating regeneration. Continuous water production, Water quality is stable , Adapted to the to high hardness water softening, such as the steam boiler and heating engineering and production process water.
1). Automatic advance water softener valve Upflow type with empty salt cabinet technology.
2). Upflow Working Position :
a). Refill before regeneration: Service->Refill the softener water->Service->Back Wash->Upflow Brine and slow rinse->Fast rinse->Service .
b). Refill after regeneration: Service->Back Wash->Upflow Brine and slow rinse->Fast rinse->Refill the softener water->Service .
3). Using ceramic moving valve disk, small rotation torque.
4). Abrasion resistance of the sealing surface, outstanding and long-lived deal.
5). It could be operated with pressure directly
In-line Stem is widely used in water purifiers, business water machines, pure water machine
Easy to use with reduced installation time
Can be used on a variety of pipes including copper pipe
No tools required
Fittings are cost-effective reusable components for maximum flexibility
For warm and cold water
Corrosion-free with no scale build-up
