没有符合您要求的产品

Other Related Products

  • FCT-8350 Flow Transmitter

    Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.

  • ROS-8600 Distributed RO Program Control HMI Platform

    Single stage RO controller used for conductivity monitoring and process program control .

  • Dissolved oxygen

    DOP-6121 membrane DO Dissolved oxygen

    Typical applications • Widely used in thermal boiler de…

  • MF2 Serials Manual Water Filter Valve

    1) Working Position : Filter->Back Wash->Fast Rinse->Filter
    2) Using ceramic moving valve disk , small rotation torque
    3) Abrasion resistance of the sealing surface, outstanding and long-lived deal.
    4) It could be operated with pressure directly.

  • JY DR Large Series Floated Bed Soften Valve

    DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.

  • JY Brine Valve

    This series of brine valves have overcome the deficiency of the products existing in the market. It can not only protect water injection and check the air, but also can limit the extreme amount of water injection and filter the water running inside. If water injection is too fast, the liquid level inside the brine well will spill out quickly and the injection has to be shut down, which will result in the insufficiency of water inside the brine tank and have bad influence upon the outcome of recycling. This kind of brine valves depends on water pressure to work. It is reliable in working and valuable in extensive employment.

  • FLECK Control Valve 2850

    Time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
    Solid, lead-free brass valve body for superior strength and durability
    Backwash capacity handles tanks up to 30″ diameter
    1-1/2″ top mount control valve ideal for smaller size commercial/industrial applications
    Consistent brining regardless of salt levels with timed brine refills
    Choice of 7 or 12 day clock, manual or meter
    Continuous flow rate of 51 GPM with a backwash of 49 GPM

  • ROC MFC-1202/ MFC-1382 General/Multi-parameter Online Controller

    Multiplex display, display window with free configuration of 2/4 parameters;
    Support bus data acquisition of 1-4 channels with arbitrary attributes;
    Support 1 way two-wire system 4-20mA variable input;
    Support WiFi and LORA and other wireless data acquisition;
    The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
    Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
    With CE certification

  • ROC pH/ORP 6900 wall mounted pH/ORP online transmitter

    1. On-line analysis and process control of the oil refining, metallurgy, chemical synthesis industry process;
    2. Water quality on-line analysis for the power industry, electronic industry, pharmaceutical industry, clinical equipment, food industry, beverage industry etc;
    3. Online analysis and drug maintenance of the process for environmental monitoring, waste water treatment, water purification ;
    4. Industry of the people’s livelihood, such as municipal water treatment, circulating cooling water, swimming pool management, scientific and technological agriculture;
    5. The biological fermentation, industrial coating, chemical process experimental study.