PH/ORP-8851 Water Quality Test PH/ORP Controller
On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;


On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;


Widely used for electric power,electronics,metallurgy,petrochemical,pharmaceutical ,food and beverage,environmental protection field.


Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
For use with single or multiple tank systems
Backwashes softener tanks up to 36″ diameter
Continuous flow rate of 106 GPM


Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.


Online dissolved oxygen detector is an online intelligent dissolved oxygen detector produced by our company with the introduction of foreign technology, using imported components and dissolved oxygen film head, based on the latest polarographic analysis technology, and advanced production technology and surface attachment technology. The use of this series of advanced analytical techniques to ensure long-term stability, reliability and accuracy of the instrument. With Chinese menu operation, 485 communication and other functions. It can be widely used in chemical fertilizer, metallurgy, environmental protection water treatment engineering, pharmaceutical, biochemical, food, aquaculture and tap water and other solutions for continuous monitoring of dissolved oxygen value.




Widely used for chemical industry,pharmaceutical,food,beverage,industrial coating,municipal water,Environmental,etc.conductivity (resisitivity) online measuring and control. It is a small-scale, industry leading and High Cost-Effective conductivity/resistivity integration online controller.


GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.


Multiplex display, display window with free configuration of 2/4 parameters;
Support bus data acquisition of 1-4 channels with arbitrary attributes;
Support 1 way two-wire system 4-20mA variable input;
Support WiFi and LORA and other wireless data acquisition;
The 3-way control output can be configured with the over-limit alarm or DI associated output of any measurement channel.
Fully sealed, wall-mounted shell, according with site protective capability of IP65 protection type.
With CE certification