Understanding Differential Pressure Transmitters

Differential pressure transmitters are commonly used in industrial applications to measure flow rates of liquids and gases. These devices work on the principle of measuring the difference in pressure between two points in a system, which is then used to calculate the flow rate. Understanding how a differential pressure transmitter works can help in optimizing processes and ensuring accurate measurements.

At the heart of a differential pressure transmitter is a sensing element, typically a diaphragm or a bellows, that is exposed to the pressure difference between two points in a system. As the flow of the fluid or gas changes, the pressure difference across the sensing element also changes. This change in pressure is then converted into an electrical signal by the transmitter, which can be used to calculate the flow rate.

Model CL-810/9500 Residual Chlorine Controller
Range FAC/HOCL:0-10 mg/L, ATC TEMP:0-50℃
Accuracy FAC/HOCL:0.1 mg/L, ATC TEMP:0.1℃
Oper. Temp. 0~50℃
Sensor Constant Pressure Residual Chlorine Sensor
Waterproof Rate IP65
Communication Optional RS485
Output 4-20mA output; High/Low limit double relay control
Power CL-810:AC 220V±10% 50/60Hz or AC 110V±10% 50/60Hz or DC24V/0.5A
CL-9500:AC 85V-265V±10% 50/60Hz
Working Environment Ambient temperature:0~50℃;
Relative humidity≤85%
Dimensions CL-810:96×96×100mm(H×W×L)
Hole Size 92×92mm(H×W)
Installation Mode Embedded

One of the key components of a differential pressure transmitter is the transmitter itself, which is responsible for converting the pressure difference into an electrical signal. This is typically done using a strain gauge, which changes resistance in response to the deformation of the sensing element. The change in resistance is then converted into a voltage signal, which can be calibrated to provide an accurate measurement of the flow rate.

Another important component of a differential pressure transmitter is the transmitter’s electronics, which are responsible for processing the electrical signal and providing an output that can be used for monitoring and control purposes. These electronics can be configured to provide a variety of outputs, such as 4-20 mA signals or digital signals, depending on the requirements of the application.

In order to accurately measure flow rates, it is important to properly install and calibrate a differential pressure transmitter. This involves ensuring that the sensing element is properly exposed to the pressure difference between the two points in the system, and that the transmitter is calibrated to provide accurate measurements. Additionally, it is important to consider factors such as temperature and pressure variations, which can affect the accuracy of the measurements.

One of the advantages of using a differential pressure transmitter to measure flow rates is that it is a relatively simple and cost-effective solution. These devices are also highly reliable and can be used in a wide range of applications, from monitoring water flow in a municipal water treatment plant to measuring gas flow in a chemical processing plant.

Model pH/ORP-8851/9900 pH/orp meter
Range 0-14 pH; -2000 – +2000mV
Accuracy ±0.1pH; ±2mV
Temp. Comp. Automatic temperature compensation
Oper. Temp. Normal 0~60℃; High temp 0~100℃
Sensor pH double/triple sensor; ORP sensor
Display Big Screen LCD Screen
Communication 4-20mA output/RS485
Output High/Low limit dual relay control
Power DC24V/0.5A or AC85-265V±10% 50/60Hz
Working Environment Ambient temperature:0~50℃
Relative humidity≤85%
Dimensions 96×96×72mm(H×W×L)
Hole Size 92×92mm(H×W)
Installation Mode Embedded

In conclusion, a differential pressure transmitter is an essential tool for measuring flow rates in industrial applications. By understanding how these devices work and how to properly install and calibrate them, it is possible to ensure accurate measurements and optimize processes. With their reliability and versatility, these devices are a valuable asset for any industrial operation.

Similar Posts