ROS-360 Water Treatment RO Program Control System
Single stage RO controller used for conductivity monitoring and process program control .
No products were found matching your selection.
Other Related Products
-
-
ROC pH/ORP 6900 wall mounted pH/ORP online transmitter
1. On-line analysis and process control of the oil refining, metallurgy, chemical synthesis industry process;2. Water quality on-line analysis for the power industry, electronic industry, pharmaceutical industry, clinical equipment, food industry, beverage industry etc;3. Online analysis and drug maintenance of the process for environmental monitoring, waste water treatment, water purification ;4. Industry of the people’s livelihood, such as municipal water treatment, circulating cooling water, swimming pool management, scientific and technological agriculture;5. The biological fermentation, industrial coating, chemical process experimental study. -
CCT-8301A Conductivity/Resistivity Online Controller
Widely used for electric power,electronics,metallurgy,petrochemical,pharmaceutical ,food and beverage,environmental protection field.
-
JY DR Large Series Floated Bed Soften Valve
DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.
-
ROC-2315 RO controller (220V)
Single stage RO controller used for conductivity monitoring and process program control .
-
JY GR Large Series Fixed Bed Softening Valve
GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.
-
JY DR-1 Fixed Bed Up Flow Regenerate Softener Valve
Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.
-
JY Brine Valve
This series of brine valves have overcome the deficiency of the products existing in the market. It can not only protect water injection and check the air, but also can limit the extreme amount of water injection and filter the water running inside. If water injection is too fast, the liquid level inside the brine well will spill out quickly and the injection has to be shut down, which will result in the insufficiency of water inside the brine tank and have bad influence upon the outcome of recycling. This kind of brine valves depends on water pressure to work. It is reliable in working and valuable in extensive employment.
-
ROS-8600 Distributed RO Program Control HMI Platform
Single stage RO controller used for conductivity monitoring and process program control .
