“Undo with ease, plastic pipe fittings made a breeze.”

Removing Plastic Pipe Fittings: A Step-by-Step Guide

Plastic pipe fittings are commonly used in plumbing systems due to their durability and ease of installation. However, there may come a time when you need to remove these fittings for maintenance or repair purposes. Undoing plastic pipe fittings can be a straightforward process if you follow the correct steps. In this article, we will provide you with a step-by-step guide on how to remove plastic pipe fittings effectively.


The first step in undoing plastic pipe fittings is to turn off the water supply to the area where the fittings are located. This is crucial to prevent any water from leaking out when you start removing the fittings. Once the water supply is turned off, you can proceed to the next step.

The next step is to identify the type of plastic pipe fittings you are dealing with. There are various types of plastic pipe fittings, such as push-fit, compression, and solvent weld fittings. Each type requires a different approach when it comes to removal. It is essential to know the type of fitting you have before attempting to remove it.

If you have push-fit fittings, you can simply push down on the collar of the fitting and pull the pipe out. However, if you have compression fittings, you will need to use a wrench to loosen the nut that holds the fitting in place. For solvent weld fittings, you will need to cut the pipe close to the fitting and then use a hacksaw to remove the fitting.

Model Tube(a) Stem(b)
1801-A 1/4 1/4
1801-C 1/4 3/16

Once you have identified the type of fitting and know how to remove it, you can start the process of undoing the plastic pipe fittings. It is essential to work carefully and methodically to avoid damaging the pipes or fittings. Take your time and follow the steps carefully to ensure a successful removal.

After you have removed the plastic pipe fittings, you may need to clean the pipes and fittings before installing new ones. Use a pipe cleaner or sandpaper to remove any debris or residue from the pipes and fittings. This will ensure a secure and leak-free connection when you install the new fittings.

When installing new plastic pipe fittings, make sure to follow the manufacturer’s instructions carefully. Use the correct tools and techniques to ensure a proper and secure connection. Once the new fittings are installed, turn on the water supply and check for any leaks. If there are no leaks, you have successfully removed and replaced the plastic pipe fittings.

In conclusion, undoing plastic pipe fittings can be a simple process if you follow the correct steps. Turn off the water supply, identify the type of fitting, and carefully remove the fittings using the appropriate method. Clean the pipes and fittings before installing new ones, and follow the manufacturer’s instructions for a secure connection. By following these steps, you can effectively remove plastic pipe fittings and maintain your plumbing system.

Similar Posts